Quietrock Lowes? Currently, the cost of QuietRock 510 is about $54 per sheet of 1/2-inch-thick, 4 x 8-foot panel. This compares to a sheet of conventional 1/2-inch-thick drywall selling for about $10 per panel. This means that you can purchase roughly five sheets of standard drywall for the cost of one QuietRock panel.
How expensive is QuietRock? Currently, the cost of QuietRock 510 is about $54 per sheet of 1/2-inch-thick, 4 x 8-foot panel. This compares to a sheet of conventional 1/2-inch-thick drywall selling for about $10 per panel. This means that you can purchase roughly five sheets of standard drywall for the cost of one QuietRock panel.
Is QuietRock worth the money? Although its cost makes it prohibitive for tight budgets, using QuietRock is the most recommended option for those who need more sound dampening. This includes recording studios, houses with noisy neighbors, rooms that require a quieter environment, and more.
Why is QuietRock not recommended for ceilings? Because of the design of the QuietRock 510 to achieve its acoustical performance, this product is not suitable for installation on ceilings as it may sag over time. One work-around solution is to install a layer of 5/8″ standard drywall over the QuietRock 510 and stagger the seams to prevent the product from sagging.
Who manufactures QuietRock?
QuietRock® Product Family | PABCO Gypsum.
Does double drywall reduce noise?
Double Drywall benefits The benefit of a double thickness of drywall with Green Glue sandwiched between is less noise penetration. The drywall adds mass, which prevents sound wave penetration, especially lower frequency, and the Glue absorbs sound vibration-damping sound vibration movement.
What is the STC rating of 5/8 drywall?
Typical existing wall construction (the most common method is wood stud construction with insulation and 5/8” drywall on both sides) has an STC rating of 30 to 34.
Can QuietRock be used on ceilings?
As long as the ceiling is standard single layer drywall over a joist system, QuietRock can be installed directly over the existing drywall and screwed into the ceiling joists using suitable drywall screws. Please note that QuietRock provides improved sound reduction for airborne noise only.
Does thicker drywall help with sound?
More thickness means more mass and more mass means better soundproofing.
Which drywall is best for soundproofing?
There are various drywall types, but the Type X drywall is the most commonly used for soundproofing. It is a fire-resistant board, and a board of 5/8″ thickness can resist fire for an hour, which concurrently makes it the best drywall to reduce noise.
How do you cut a QuietRock 530?
QuietRock works with wood and metal framing. 2) QuietRock 530 should not be scored/broken. Instead, cut QuietRock 530 panels as needed, using a standard hand or power saw. You can use standard rotary cut-out tools around junction boxes.
How thick is QuietRock?
Often, QuietRock outperforms multiple layers of gypsum drywall and can exceed STC requirements for most wall applications and is more reliable than resilient channel. QuietRock products range from 1/2″, 5/8″, and 1-3/8” thicknesses, providing options for specific design and soundproofing goals.
How is QuietRock made?
QuietRock panels are manufactured primarily from gypsum panels and viscoelastic polymers. Varying combinations of panels (as constraining-layers) are combined with one or more layers of viscoelastic polymer to create composite panels with varying thicknesses, from 1/2″ to 1-3/8” (13 to 35 mm).
How many tubes of Green Glue are in a sheet?
Applying 1 tube of Green Glue per 4″×8″ sheet will deliver about 70% of the performance of 2 tubes. Three tubes is optimal per 4″×8″ sheet will improve low-frequency performance around the primary resonance. We do not recommend using more than 3 tubes per sheet. If you use too much Green Glue, performance will decline.
How do you sound proof a room?
Cover walls with thick blankets, moving pads, tapestries, or quilts. Virtually any soft material will work, though thicker ones absorb more sound than thinner materials. If you don’t mind adding an industrial look to the room, fasten sound-absorbing panels to the walls and, if necessary, the ceiling.
How do you calculate STC for walls?
Find the average transmission loss: Add up all the total frequencies you recorded, then divide that number by the total number of frequencies you tested. For example, if you recorded all 16 frequencies, divide your total by 16. The number you calculate is your STC rating.
Can you add STC ratings?
You can’t add STC ratings together. For instance, if you have an STC of 40 on one wall and decide to add another wall with an STC of 20, the STC of both walls combined will not be 60. Instead, the STC will be calculated using logarithms, and will probably produce a rating of about 45.
What insulation is best for soundproofing?
When soundproofing is your goal, your best options out there are fiberglass insulation and blown-in cellulose insulation. Both materials are incredibly good at their jobs; they insulate incredibly well but also have the coveted noise-reducing properties that many homeowners are seeking.
How many layers of drywall do I need for soundproofing?
Adding another layer of soundproof drywall using sheetrock offers enormous benefits in soundproofing. Having two layers of sheetrock reinforced with fiberglass insulation or spray foam and decoupling materials help prevent sound from passing through by all means.
Does Green glue work for impact noise?
Green Glue Noiseproofing Compound. Applying layers of Green Glue Noiseproofing Compound to the floor above is effective at damping airborne noise, but NOT greatly reduct impact or other structure-borne noise. The compound dissipates the vibrations caused by sound waves as they move through a structure.